8-2] Leading Number - Panasonic KX-NCP500 Pc Programming Manual

10.2 [8-2] Leading Number

10.2 [8-2] Leading Number
Specifies the area codes and/or telephone numbers as leading numbers that will be routed by the ARS feature.
A maximum of 1000 different leading numbers can be programmed, and each leading number can select a
Routing Plan Table number, which determines the ARS procedure.
The additional (remaining) number of digits can also be specified for each leading number. The additional
(remaining) number of digits must be specified only when "#", for example, is needed after the dialed number.
The "#" will be added after the programmed number of digits of the user-dialed number (excluding the leading
number).
100 leading numbers are displayed at a time. To display other sets of leading numbers, click the applicable
tab.
Leading Number
Specifies the leading number.
Default
Not stored.
Value Range
Max. 16 digits (consisting of 0–9, *, #, and X)
Maintenance Console Location
10.2 [8-2] Leading Number
Programming Manual References
None
Feature Manual References
1.1.3 ARS (Automatic Route Selection)
Additional Number of Digits
Specifies the additional (remaining) number of digits following each leading number.
Default
0
Value Range
0–15
Maintenance Console Location
10.2 [8-2] Leading Number
Programming Manual References
None
756 PC Programming Manual Document Version 2009-12