Startup Compensation Time - Omron K3NR Operation Manual

Setting Mode
stime
FUNCTION
SETTING
REFERENCE
SETTING
EXAMPLE
1, 2, 3...
74

Startup Compensation Time

• The interval between the moment the K3NR is turned and the moment the
K3NR starts measurement operation is set in the option menu.
• The startup compensation time parameter keeps the measurement operation
from sending an unnecessary output corresponding to instantaneous, fluctu-
ating input from the moment the K3NR is turned ON until the end of the preset
period.
Setting range
0.0 to 99.9
The K3NR will display "00000" with all outputs turned OFF until the K3NR is in
measurement operation.
Display
L set value
Power ON
L comparative output
Follow the steps described below to set the startup compensation time to 2 seconds.
1. Press the Mode Key for more than one second while the opt option menu is
displayed. The aUg process time for averaging measured value setting will
appear.
S
Display = 00000
(measurement
interrupted)
Setting time
Set Value LED Display Model
Set Value LED Display Model
Section 4-2
Unit Default
0.0
Time
Basic Model
Basic Model