Omron K3NR Operation Manual page 65

Setting Mode
10. Press the Mode Key to display the decp decimal point position setting.
Note If the set operating mode is F2 through F5, the ps.bx prescaling value
X (mantissa) of input B setting will be displayed.
Set Value LED Display Model
11. Press the Shift Key to display %%%%% for changing.
Set Value LED Display Model
12. Press the Shift Key to set %%%%.%. The input will be validated automatically if
no change is made for five seconds. The decp decimal point position setting
will be displayed again.
Note Press the Mode Key to enter the set value immediately. The p.bank
prescaling bank setting will be displayed for setting the next parame-
ter.
Set Value LED Display Model
13. Press the Escape Key to display the pscl prescaling menu.
Set Value LED Display Model
Set Value LED Display Model
Section 4-2
Basic Model
Basic Model
Basic Model
Basic Model
Basic Model
57