Setting Mode; Selecting Setting Mode - Omron K3NR Operation Manual

Setting Mode

4-2

Setting Mode

4-2-1 Selecting Setting Mode

• The K3NR in RUN mode will go into setting mode if the Mode Key is pressed for
1 s minimum.
• The K3NR in setting mode will go into RUN mode if the Escape Key is pressed.
Press the Mode and Shift Keys
while turning the K3NR on.
Maintenance mode
1 second
• The menu in each mode changes whenever the Mode Key is pressed.
• If the Mode Key is pressed for more than one second while a menu is dis-
played, a parameter will be displayed.
• The parameter changes whenever the Mode Key is pressed.
• If the Shift Key is pressed while a parameter is displayed, the parameter will be
ready to change.
• Press the Up Key to change parameters.
• The digit of a set value is selected with the Shift Key and changed with the Up
Key.
• The PROG indicator is lit while a menu or parameter is displayed.
• The PROG indicator flashes during a set value change.
Note If the operating mode is changed, all the other parameters will be set to default
values except communication setting and set values in protect mode. Therefore,
set the operating mode and sensor type first.
Power On
Press the Escape and Up
Keys for 1 second.
RUN mode
RUN mode
Setting mode
Section 4-2
Protect mode
47