Setup Menu (Setup); Operating Mode - Omron K3NR Operation Manual

Setting Mode

4-2-5 Setup Menu (setup)

func
FUNCTION
SETTING
REFERENCE
SETTING
EXAMPLE
1, 2, 3...
58

Operating Mode

Use this menu to select the operating mode of the K3NR. All parameters will be
set to default values if any change is made in this parameter except to those for
the communications and protect settings.
f1:
f2 through f5: Displays the result of the arithmetic operation of two different
f6:
f7:
Setting
f1:
Rotational/circumferential speed
f2:
Absolute ratio
f3:
Error ratio
f4:
Rotational difference
f5:
Flow rate ratio
f6:
Passing time
f7:
Pulse counting
Refer to Section 3 Operating Modes.
Follow the steps described below to select the f4 rotational difference setting.
1. Press the Mode Key for more than one second while the setup setup menu
is displayed. The func operating mode setting will appear.
2. Press the Shift Key to display f1 for changing. The PROG indicator will flash.
Displays the number of circumferential or rotational speed of in-
put A.
revolutions.
Displays the value of passing time calculated from the frequen-
cy or processing length of input A.
Displays the pulse counting of input A.
Default
f1
Set Value LED Display Model
Set Value LED Display Model
Set Value LED Display Model
Section 4-2
Basic Model
Basic Model
Basic Model