Menu Overview - Omron K3NR Operation Manual

Setting Mode

4-2-2 Menu Overview

RUN Mode
Refer to Section 5 Operations in RUN Mode.
Setting Mode
Output Test
Refer to Section 6
Useful Functions.
Note
48
Press the Mode and Shift Keys
while turning the K3NR on.
Power On
Press the
Mode Key
for 1 second.
Setting value menu
Press the Mode Key for 1 second.
(see note 1)
Bank no. of set value
1 to 4
HH setting value
H setting value
L setting value
LL setting value
1. When making new settings or changing settings of each parameter, press the
Shift Key to shift to the setting state.
The input will be updated automatically if no change is made for five seconds.
2. The K3NR stops measurement in setting mode.
Some menus cannot be set according to the Output Board selected.
If the operating mode is changed, all the other parameters will be set to default
values except communication setting and set values in protect mode. There-
fore, set the operating mode and sensor type.
Maintenance Mode
Refer to Section 6 Useful Functions.
Press the Escape and
Protect Mode
Up Keys for 1 second.
Refer to 4-3 Protect Mode.
Prescaling menu
Bank no. of prescale
value
Prescaling value of input A
X (mantissa)
Prescaling value of input A
Y (exponent)
Prescaling value of input B
X (mantissa)
Prescaling value of input B
Y (exponent)
Decimal point position
Section 4-2
Press the Mode Key for 1 second.