Omron K3NR Operation Manual page 118

Teaching Function
110
4. Press the Mode Key to display the ps.ay prescaling value Y (exponent) of
input A setting.
Note The asterisks indicate appropriate values.
Set Value LED Display Model
5. Press the Mode Key to display the decp decimal point position setting.
Set Value LED Display Model
6. Press the Shift Key to set %%%.%%. The displayed setting will be validated au-
tomatically if no change is made for five seconds. The decp decimal point
position setting will be displayed again.
Set Value LED Display Model
7. Press the Escape Key to display the pscl prescaling menu.
Set Value LED Display Model
Section 6-1
Basic Model
Basic Model
Basic Model
Basic Model