Omron K3NR Operation Manual page 90

Setting Mode
MODELS
SETTING
EXAMPLE
1, 2, 3...
82
This setting is only available for the K3NR with the Comparative Output Unit.
Follow the steps described below to set the comparative output pattern to level output.
1. Press the Mode Key for more than one second while the opt option menu is
displayed. The aUg process time for averaging measured value setting will
appear.
2. Repeatedly press the Mode Key until the c out comparative output pattern
setting is displayed.
3. Press the Shift Key to display the prior setting nomal for changing. The
PROG indicator will flash.
4. Press the Up Key twice to display leUel. The setting will be validated auto-
matically if no change is made for five seconds. The c out comparative out-
put pattern setting will be displayed again.
Note Press the Mode Key to enter the setting immediately. The next pa-
rameter will be displayed for setting.
When no operation is executed for five seconds
Set Value LED Display Model
Set Value LED Display Model
Set Value LED Display Model
Set Value LED Display Model
Set Value LED Display Model
Set Value LED Display Model
Section 4-2
Basic Model
Basic Model
Basic Model
Basic Model
Basic Model
Basic Model