Parmco PPOV-9S-48 Installation And Operating Instructions Manual page 16

REMOVING THE OVEN DOOR
You can remove the oven door for better access to the oven when cleaning.

Open the door fully.

Locate the hinge assembly (1).

Lift the hinge tab to the open position (2).

Gently close the door until the hinge assembly engages against the door (3).

Lift the door up and out at the same time.

To replace the door, reverse the above procedure making sure that the hinge is correctly located on
the small rebate in the hinge arm (4)
1
4
REPLACING THE OVEN LAMP
WARNING: Ensure that the appliance is switched off before replacing the lamp to avoid the possibility of
electric shock.
1. Remove the glass cover of the lamp - holder;
2. Remove the lamp and replace with a lamp resistant to high temperatures (300℃) with the
following characteristics:
a. Voltage: 220-240V
b. Wattage: 2X25W
c. Type: E 14
3. Replace the glass cover and reconnect the oven to the mains power supply.
2
3
16