Registering An Ic Card - Riso 9630R Administrator's Manual

6
Configure each setting.
• Be sure to configure [Index].
• If [PC Login ID] is incorrect when [Print
Mode] under [Permission Setting] is set to
[ON], jobs cannot be received from the
computer. Make sure that the correct PC
login ID is entered in [PC Login ID].
7
Touch [OK].
• To change or delete a user setting, perform the
following operation.
To delete a user:
Select the user on the [User Setting] screen,
and touch [Delete].
To change settings:
Select the user on the [User Setting] screen,
touch [Edit], and change the settings.
• This function can also be configured from the
RISO Console.
To add a user:
Click [Add User] on the [User Setting] screen.
To delete a user:
Select a user on the [User Setting] screen, and
click [Delete This User] on the [Edit] screen.
To change settings:
Select a user on the [User Setting] screen, and
configure the user information on the [Edit]
screen.
34

Registering an IC Card

If an IC card reader is connected, you can register
the authentication card information for the
registered user.
1
Select the user name on the [User
Setting] screen.
2
Touch [IC Card Regist.].
The message [Set the IC card.] is displayed.
3
Set the IC card to the IC card reader.
The message [Registration of user is complete.] is
displayed after the card is registered.
4
Touch [Close].
The [User Setting] screen is displayed.
ComColor GD Series Administrator's Guide