Riso 9630R Administrator's Manual page 44

1
Select [System] - [Power Schedule]
on the [Admin Menu] screen.
The [Power Schedule] screen is displayed.
2
Touch [ON].
3
Select the set to save the settings
for and touch [Edit].
The screen for setting the starting and ending time
and day of the week is displayed.
4
Set the [Start] and [End] times.
You can set the time by selecting the respective
check boxes.
5
Select the day to apply.
You can set the same time to different days of the
week.
6
Touch [OK].
The [Power Schedule] screen is displayed.
42
7
Touch [OK].
The [Admin Menu] screen is displayed and the
power schedule function activates.
The [Confirm] screen appears on the operation
panel one minute before the set end time.
If you do not want the machine to turn off, touch
[Suspend]. Close the [Confirm] screen to suspend
the power-off process. The [Confirm] screen will be
displayed again after one minute.
If you do not touch [Suspend] during the last minute
before the set end time, the machine starts the
power-off process.
• In the following cases, this machine cannot be
turned off using the power schedule function:
- When a paper jam, service call, unit error, set-
related error, or warning error (except for a
paper shortage error) has occurred
- When the machine is in use at the set time
• This function can also be configured from the
RISO Console. (See p. 12)
ComColor GD Series Administrator's Guide