Setting The Administrator Password - Riso 9630R Administrator's Manual

Setting the Administrator
Password
The factory setting has a user with administrator
authority named "Admin" registered.
When using this machine for the first time, log in as
"Admin" by following the procedure below and set
the password.
1
Press the [Login/Logout] key on the
operation panel.
The [Login] screen is displayed.
2
Touch [Admin].
The [Password] screen is displayed.
3
Enter the temporary password.
The factory setting is "0000".
10
4
Touch [Login].
The [Change Password] screen is displayed.
5
Enter the new password and touch
[Next].
The password must be 0 to 16 alphanumeric
characters.
After you touch [Next], the [Change Password
(confirm)] screen appears.
6
Enter the new password again and
touch [OK].
The user name can be changed under [User Setting]
in the administrator menu.
For specific information on how to configure the
"Administrator menu setting items", see "User
Setting" (p. 32).
ComColor GD Series Administrator's Guide