Non RISO Ink Setting
(Only on the Operation
Panel)
Use this setting to permit the use of non-RISO ink
for each color.
[OFF], [ON] (Factory setting: [OFF])
• The following problems may occur when using
non-RISO ink.
- Fading of prints and color tone changes due to
differences in ink performance
- Fading of prints or damage to the inkjet head
(requiring replacement) due to a chemical
reaction between the ink and the parts in direct
contact with the ink (inkjet head, ink path, etc.)
- Ink leaks (requiring replacement of the ink
path) caused by air entering the ink path due
to a chemical reaction between the ink and the
ink path (tubes, etc.)
• Malfunctions and a reduction in performance as
a result of using non-RISO ink are not covered
by the product warranty or service contract. The
inkjet head and ink path are expensive parts. In
addition, it takes a long time to replace these
parts.
• Depending on the ink cartridge, you may not be
able to use the ink cartridge even when this
setting is set to [ON].
Only use this function after understanding the
above risks associated with using non-RISO ink.
1
Select [Printer] - [Non RISO Ink
Setting] on the [Admin Menu]
screen.
The [Non RISO Ink Setting] screen is displayed.
Administrator Menu Setting Items
2
Select [ON] for the ink to permit use,
and touch [OK].
3
Read the confirmation message, and
then touch [Yes].
4
Touch [OK].
ComColor GD Series Administrator's Guide
43