Ip Address Limiting (Ipv4 Or Ipv6) - Riso 9630R Administrator's Manual

IP Address Limiting (IPv4
or IPv6)
You can register up to 12 subnet masks and IP
addresses that can access this machine, each for
LAN0 and LAN1.
[LAN0], [LAN1]
Configure the limitations of access for each of the two
networks connected to the LAN0 terminal and LAN1
terminal on the rear of the machine.
• [LAN1] cannot be selected when using the
optional print controller.
[OFF], [ON]
Use this function to restrict the computers that can
access this machine. If this option is set to [ON], you can
specify the addresses that can access this machine.
[IP Address]
[Subnet Mask] (when IPv4 is used)
[Prefix Length] (when IPv6 is used)
1
Select [System] - [IP Address
Limiting (IPv4)] or [IP Address
Limiting (IPv6)] on the [Admin Menu]
screen.
The [IP Address Limiting (IPv4)] screen or [IP
Address Limiting (IPv6)] screen is displayed.
Administrator Menu Setting Items
2
Select [LAN0] or [LAN1].
3
Select [ON] and configure the
settings.
ComColor GD Series Administrator's Guide
47