Setting Items - Riso 9630R Administrator's Manual

■ Setting Items

The items you set in [Authentication Servers] are as follows.
• The factory settings are underlined.
Server Setting
Add, edit, or delete LDAP servers (primary/secondary) and Kerberos servers
(primary/secondary), as well as set the priority.
IC Card Authentication
With up to 32 alphanumeric characters, a maximum of 5 attributes can be set
for IC cards used for authentication.
Enable or disable the attributes applied to IC cards.
Access Time-out
Specify the time-out period for accessing the authentication server.
Setting / Description
Administrator Menu Setting Items
Set value / Details
LDAP Server
(Primary / Secondary)
• [Address]: IP address or server
name, up to 256 alphanumeric
characters
• [Port]:
1 - 65535 (Factory setting: 389)
1
• [Search Login Name] :
Up to 256 alphanumeric characters
2
• [Search Password] :
Up to 32 alphanumeric characters
3
• [Search Root] :
Up to 256 alphanumeric characters
4
• [Search Scope] :
[Root Entry Only], [Root Entry and
One Level Below], [All Levels Below
Root Entry]
Kerberos Server
(Primary / Secondary)
• [Realm]: Up to 64 alphanumeric
characters (only upper case
characters)
5
• [Login-to Name] :
Up to 10 characters
• [Address]: IP address or server
name, up to 256 alphanumeric
characters
• [Port]:
1 - 65535 (Factory setting: 88)
• [Attribute of IC Card ID]
[OFF], [ON]
• [Attribute used for IC Card
Authentication]
[OFF], [ON]
• [OFF], [ON]
• 5 sec. - 120 sec.
(Factory setting: 5 sec.)
ComColor GD Series Administrator's Guide
37