Fitting Half-Cell Probes - Elcometer 331 SH Operating Instructions Manual

search heads are larger and do not fit in the rails. Each head is fitted with a label which identifies
its type for ease of recognition. The software also shows an indication of the search head type as
indicated in section 3.2.

3.4 Fitting half-cell probes

Connect the probe and cables as shown in Figure 5. The search head can be left connected to the
gauge at the same time as the half-cell probe, however for ease of use it is recommended that the
search head is removed and stored in the carry case.
Red
cable
Figure 5. Fitting half-cell probe and cables
R
G
ETTING STARTED
Black
cable
7