Elcometer 331 SH Operating Instructions Manual page 50

B /D
ATCHING ATA LOGGING
Pressing BATCH displays the Reading Review Screen.
REVIEW readings using the scroll keys to move around the contents
of a batch.
Press and hold the Shift softkey [
Scroll keys to jump quickly to the start or end of line of readings.
When you have finished reviewing, press [ ] to return to the reading
screen at the current memory location or press [menu/esc] to return to
the reading screen at the original memory location.
DELETE readings by pressing the Delete softkey [
confirm deletion or No to cancel.
When you have finished deleting, press [ ] to return to the reading
screen at the current memory location or press [menu/esc] to return to
the reading screen at the original memory location.
You can OVERWRITE any of the readings.
1. Use the scroll keys to move to the reading you want to overwrite.
2. Press [ ].
The display switches to the reading screen.
3. Take a new measurement and press [ ] to enter reading.
4. Press Yes to confirm overwrite or No to cancel.
SKIP OVER memory locations in a grid batch (TH models only) using the scroll keys to move
around the contents of the batch. This facility is useful when surveying in a grid around obstructions.
The memory locations in the vicinity of the obstructions can be skipped over and left blank. When
you are ready to return to the reading screen, press [ ].
46
R
] and then press any of the
Figure 23. Grid reading
(TH models only)
]. Press Yes to
Figure 24. Linear batch
reading review screen
review screen