Elcometer 331 SH Operating Instructions Manual page 20

T
HE MENUS
4.10 SELECT STATS
NO. OF READINGS . . . . . . . . Press Enter to toggle on or off
MEAN. . . . . . . . . . . . . . . . . . . Press Enter to toggle on or off
STD DEVIATION . . . . . . . . . . Press Enter to toggle on or off
COEF OF VARIAT'N . . . . . . . Press Enter to toggle on or off
LOWEST READING. . . . . . . . Press Enter to toggle on or off
HIGHEST READING . . . . . . . Press Enter to toggle on or off
UNDER RANGE. . . . . . . . . . . Press Enter to toggle on or off
BELOW LIMIT . . . . . . . . . . . . Press Enter to toggle on or off
ABOVE LIMIT. . . . . . . . . . . . . Press Enter to toggle on or off
OVER RANGE . . . . . . . . . . . . Press Enter to toggle on or off
k
BLANK . . . . . . . . . . . . . . . . . Press Enter to toggle on or off
Note: Only two statistics from the above list can be toggled to 'on' at the same time.
4.11 SOUND MODE
LOCATE . . . . . . . . . . . . . . . . . Press Enter to toggle on or off
MAXPIP . . . . . . . . . . . . . . . . . Press Enter to toggle on or off
UNDER COVER. . . . . . . . . . . Press Enter to toggle on or off
Note: Locate cannot be toggled to 'on' at the same time as either Maxpip™ or Under Cover.
See "Sound mode/Detection mode" on page 33
4.12 UNITS
COVER . . . . . . . . . . . . . . . . . Press Enter, use Scroll keys to select units (mm/inch) and then
TEMPERATURE . . . . . . . . . . Press Enter, use Scroll keys to select units (°C/°F) and then
4.13 LIMITS
LOW LIMIT . . . . . . . . . . . . . . . Opens Low limit menu. . . . . . . . . . . See 4.18 LOW LIMIT
HIGH LIMIT . . . . . . . . . . . . . . Opens High limit menu . . . . . . . . . . See 4.19 HIGH LIMIT
l
4.14 CLOCK
TIME/DATE . . . . . . . . . . . . . . Use Scroll keys and Left/Right softkeys to set time and date
SET DATE FORMAT . . . . . . . Opens Set date format menu . . . . . See 4.20 SET DATE FORMAT
4.15 OUTPUT
BAUD RATE. . . . . . . . . . . . . . Opens Baud rate menu . . . . . . . . . . See 4.21 BAUD RATE
RS232 BIT IMAGE . . . . . . . . . Press Enter to toggle on or off
RS232 PLAIN TEXT. . . . . . . . Press Enter to toggle on or off
Note: RS232 Bit Image and RS232 Plain Text cannot be toggled to 'on' at the same time.
See "Transferring readings to a computer" on page 52
k. 'Blank' - available on Elcometer 331 Model TH only.
l. 'Clock' - available on Elcometer 331 Model TH only.
16
R
press Enter
press Enter
and then press Enter