Fitting The Probe - Elcometer 456 Operating Instructions Manual

The High Temperature PINIP™ is an F1 2
scale probe which combines the F1 scale
with the F2 scale in a single probe. The user
selects the appropriate range for the work in
hand. The resolution of the gauge is
dependent on the scale selected on the
gauge.
1.1 What the box contains
• Elcometer
PINIP™ probe
• Calibration thickness standard, 2 x
• Storage case, 2 x
• Operating instructions

2 FITTING THE PROBE

To ensure correct transfer of data from the
probe and detection of the new probe, the
gauge must be switched off when the
PINIP™ probe is fitted.
Twist the PINIP™
until the connector
locates.
care not to cross
the threads, lock
the probe by turning
the locking ring 1½
times clockwise, or
until tight.
456
Taking
High Temperature
3