Elcometer 331 SH Operating Instructions Manual page 43

13.4 Select stats
Allows the user to choose which statistics values are
displayed on the reading screen during measurement.
Use [ ] and [ ] to move the cursor and press [ ] to select
or deselect the statistics values.
Only two statistics values can be selected and displayed
on the reading screen at the same time. To view all
statistics values choose:
MENU / STATISTICS / ENLARGE STATS / ALL
On Elcometer 331 Model TH, the selected statistics values
will only be displayed on the reading screen if the display
of time and date is not selected:
MENU / SETUP / DISPLAY / SHOW TIME
Note: 'Blank' - Elcometer 331 Model TH only.
SELECT STATS
NO. OF READINGS
MEAN
STD DEVIATION
COEF OF VARIAT'N
LOWEST READING
HIGHEST READING
UNDER RANGE
BELOW LIMIT
ABOVE LIMIT
OVER RANGE
BLANK
R
S
TATISTICS
39