Sam4s NR-500 series Operating And Programming Manual page 110

Copy the Images to an SD Card
The PC Utility will create two image files:
They will be located in your PC at:
C:\Users\[Computer name]\Documents\eSpresso\[Store name]\[Register name]
Copy the mages to the following path on your SD card:
SD\\NR-500\Storename\IMAGE
Important: In the path: C:\Users\[Computer name]\Documents\eSpresso\[Store
name]\[Register name], the store name and register name are the names you have
defined as the store in the SAM4s PC Utility.
Note: You must use the same store name in the NR-500 Series ECR at "Store name"
of "SYSTEM" of the "Options Programming" in the "Program Mode Programming".
Note that the default store name is "STORE001".
Saving Images from an NR-500 Series to an SD card
Loading the Images by SD card
108 • Service Mode Programming

USERPRE.IMG

USERPOST.IMG
1. Insert the SD card in the register's SD slot.
2. Move to the SERVICE MODE.
3. From the Service Mode menu, select "7.PROGRAM BACKUP".
4. From the PROGRAM BACKUP menu select "1.SD".
5. From the SD menu select "4.IMAGE SAVE".
6. The message "SUCCESS !" will display on the LCD.
1. Insert the SD card in the register's SD slot.
2. Move to the SERVICE MODE.
3. From the Service Mode menu, select "7.PROGRAM BACKUP".
4. From the PROGRAM BACKUP menu select "1.SD".
5. From the SD menu select "5.IMAGE LOAD".
6. The message "SUCCESS !" will display on the LCD.
SAM4S NR-500 Series Manual