Sam4s NR-500 series Operating And Programming Manual page 35

SERVICE
SUBTOTAL
TABLE
TARE
TAX EXEMPT
TAX SHIFT (1-4)
TIP
VOID
WASTE
VALIDATION
SAM4S NR-500 Series Manual
Use to temporarily finalize Previous Balance or check tracking transactions.
Displays subtotal of sale including tax. Must be pressed prior to a sale
discount or sale surcharge.
You can enforce the entry of a table number for guest check transactions, or
for all transactions. If you are tracking guest check balances, the balance
can be recalled either by entering the check number or the table number.
Tares are continer weights. If you are using the scale function, you can preset
up to 5 different tare weights. The tare can be subtracted automatically when
a specific PLU is registered, or the tare can be subtracted by manually
inputting the tare number and pressing the TARE key. Tare #5 can be
programmed for entering tare weights manully.
Press the TAX EXEMPT key to exempt tax 1, tax 2, tax 3, and/or tax 4 from
the entire sale.
When pressed before a PLU entry, the tax shift keys reverse the tax status of
the PLU, i.e., a PLU with non-tax status would become taxable or a PLU with
tax status would become non-taxable.
The TIP key allows a gratuity to be added to a guest check before payment.
The tip amount is deducted from the Cash-in-Drawer amount for the
Clerk/Cashier closing the guest check.
The TIP key may be programmed as either a percentage or amount. If
programmed as a percentage, tax programming defines whether the
percentage is calculated on the net amount, or the amount after taxes.
Use to correct an item entered earlier within a sale. The VOID key corrects
the appropriate totals and counters. To correct the last item, use the
ERROR CORR key. For void operations outside of a sale (Transaction
Void), use the VOID MODE. The Financial report records totals for each
type of void separately.
Allows control of inventory by accounting for items that must be removed
from stock due to spoilage, breakage or mistakes. Press the WASTE key
before entering wasted items, and then press the WASTE key again to
finalize. The WASTE key may be under manager control, requiring the
mode to be in the MANAGER MODE. The WASTE key is not allowed
within a sale.
Press to intiate a single line validation. Note that an optional printer with
validation capability must be attaced to the NR-500 and identified.
Operations • 33