Nlu Code# Program - Sam4s NR-500 series Operating And Programming Manual

NLU Code# Program

NLUs are fixed keys on the keyboard (like traditional department keys) that access specific
PLUs.
On the default keyboard the PLU# assigned to the NLU key is the same, i.e. NLU key
number one is PLU #1. However, with this program, you can assign any PLU number
you wish to any one of the NLU keys.
130 • Program Mode Programming
7. Select operator ADD(+), SUB(-) or REPLACE.
8. Enter the stock quantity you wish to ADD/SUBTRACT/REPLACE, and press
CASH. Note that stock is kept in decimal units and you must enter new or
additional stock to two digits beyond the decimal. For example, type 1 0 0 0
to enter ten units of inventory.
9. To program a additional PLUs repeat step 5 or 6, or press CLEAR key to
finalize.
1. From the PLU PROGRAMMING menu, press 4 and CASH for NLU
CODE# PGM. The NLU CODE PROGRAM screen displays:
N L U C O D E # P G M
E NT E R N L U KE Y
2. Press the NLU key on the keyboard you wish to program, or press CLEAR to
exit.
NL U CO D E # P G M
N LU # 1
E NT E R N E W PL U #
3. The current PLU code number displays. Type the new PLU code number you
wish to use for this NLU key, press CASH.
4. The NLU CODE PROGRAM screen returns. Continue from step 1 to
program additional NLU keys, or press CLEAR to exit.
0
SAM4S NR-500 Series Manual