Sam4s NR-500 series Operating And Programming Manual page 160

To Remove a Macro
NOTE
158 • Program Mode Programming
E NT E R F U N C .K E Y
3 :
6. Return to the PGM Mode. Press the same MACRO key to end the sequence.
7. Continue to program additional MACRO key sequence or press CLEAR key
to return to PROGRAM MODE screen.
If you wish to remove a key stroke from a macro, replace the current function with
the INACTIVE function.
PAGE↑ , PAGE↓ , ↑ , ↓ keys are to move menu to menu in X, Z, P, S mode
so the Macro Key need to be other places than those(PAGE↑ ,PAGE↓ ,↑ ,↓ ).
C A S H
SAM4S NR-500 Series Manual