Function Key Assignment - Sam4s NR-500 series Operating And Programming Manual

Function Key Assignment

Any programmable key location may be reprogrammed with a function from the list of
available functions on page 97 of this manual. The default program installs the functions
as they are shown with the standard key legends.
To change the function on a specific key:
Notes:
1. Numeric keys (0-9), CLEAR, and CASH cannot be removed from the keyboard
unless they have been assigned to a new keyboard location. This protects the
programmer from accidentally removing keys that are required for register
programming and operations.
2. If you wish to program the CASH key, select it immediately after selecting KEY
ASSIGNMENT from the SERVICE MODE menu. After the initial key is
programmed, the CASH key is used to finalize the program.
96 • Service Mode Programming
1. At the SERVICE MODE, press 4 and CASH for Key Assignment
programming. The KEY ASSIGNMENT screen displays:
2. Enter a new key code from "Function key codes" on page "97" and press key
location. Press the SUBTOTAL to print the key code table.
3. Press CASH to save the changes you have made and to return to SERVICE
MODE.
4. The printer will print out a receipt showing all the changes made to the
keyboard.
SAM4S NR-500 Series Manual