Setting The Ethernet Speed; Setting The Ldap Services, Filtering Functions And Link Down Detection; Setting Ipsec (Ip Security) - Toshiba E-STUDIO477S Advanced Manual

Setting the Ethernet speed

You can specify the Ethernet speed.
Item name
ETHERNET SPEED Select the desired combination of
DUPLEX MODE communication speed and
transmission method.
Note
• The options vary depending on the model.
• Some models have [AUTO] while others have [AUTO (-
100MB)] and [AUTO (-1000MB)] as options. If you do not
know the speed of the network you are connected to, select
[AUTO], or either [AUTO (-100MB)] or [AUTO (-1000MB)]
depending on your model instead of the button of a specific
speed and mode.
• The current Ethernet speed is displayed above the buttons.
"Link not detected" is displayed when links failed to be
detected.
• If the network is not stable, turn the power of the equipment
OFF and then back ON.
Setting the LDAP services, filtering
functions and link down detection
You can enable the LDAP directory service which allows the
equipment to search the LDAP server for contacts to specify
recipients for Internet Faxes, fax transmissions, and Scan to E-
mail jobs. Furthermore, the LDAP server can also be used for
searching for contacts when creating a template with
TopAccess, or a contact in the address book.
In this setting menu, you can also select whether to use the IP/
MAC address filtering functions and the linkdown detection
function.
Description
- 185 -
Item name
ENABLE LDAP
ENABLE IP FILTERING
ENABLE MAC
ADDRESS FILTERING
LINK DOWN
DETECTION
Memo
To add the LDAP directory service, you must operate using
TopAccess. For details on how to register the directory service,
refer to the TopAccess Guide "Chapter 8: [Administration]
Tab Page".
Note
• If the LDAP network service is disabled, you will not be able
to acquire the "From Address" from the LDAP server during
the User Authentication for Scan to E-mail for transmitting
an E-mail.
• If this equipment is not connected to the network, disable
the link down detection function.

Setting IPsec (IP security)

When the IPsec Enabler is installed, the encrypting of
communication using the IPsec (IP Security Protocol) becomes
possible.
In IP security setting, you can perform the following operations.
• Viewing the IPsec policy name currently applied
• Enabling or disabling IPsec communication
• Flushing (resetting) IPsec session
SETTING ITEMS (ADMIN)
Description
• ENABLE — Press this button
to use the LDAP network
server service.
• DISABLE — Press this button
to disable the LDAP network
server service.
• ENABLE — Press this button
to use IP filtering.
• DISABLE — Press this button
to disable IP filtering.
• ENABLE — Press this button
to use MAC address filtering.
• DISABLE — Press this button
to disable MAC address
filtering.
• ENABLE — Press this button
to use the link down
detection.
• DISABLE — Press this button
to disable the link down
detection.
1
2
3
4
5
6
7