Drawer; Address - Toshiba E-STUDIO477S Advanced Manual

SETTING ITEMS (USER)

DRAWER

1
You can set the paper size and paper type for each drawer.
Memo
For instructions on how to display the DRAWER screen, see
the following page:
 P.139 "Accessing the User Menu"
1
On the DRAWER screen, press the portion
2
of the illustration corresponding to the
drawer whose paper size you want to
change, and press the desired paper size
button.
3
4
In models that can automatically detect the paper size,
selecting [AUTO] instead of the paper size button allows
you to automatically set the size of the paper placed in
the drawers.
Select [CUSTOM] and then key in the paper size when
using non-standard size paper.
5
The acceptable paper size is as follows; Length: 210 to
356 mm, Width: 148 to 216 mm.
If 13LG, 13.5LG, 14LG or Folio size paper is placed on
the drawer, "Change the size to be detected, press
[DETECT SIZE]." will appear on the upper left of the
screen. In that case, press [DETECT SIZE], select the
size of the placed paper and then press [OK].
6
Note
• The displayed buttons differ depending on the model.
If you want to change the paper type from plain paper to
another or want to specify the purpose of use of the paper
in the drawer, press [PAPER TYPE] and proceed to step
2. If you do not need to set paper type, press [OK] and
complete the operation.
7
2
Press the portion of the illustration
corresponding to the drawer whose paper
type you want to change and press the
desired paper type button, then press [OK]
to complete the settings.
The PAPER TYPE screen consists of two sections:
THICKNESS and ATTRIBUTE.
Set THICKNESS when using thick paper and recycled
paper.
Set ATTRIBUTE when using the paper in the drawer for a
specific purpose. For example, if you select [INSERT] for
a drawer, the paper in the drawer will always be used for
copy insertion.
Note
• The displayed buttons differ depending on the model.
Memo
• Paper placed in a drawer set with THICKNESS other
than [PLAIN], or paper placed in a drawer set with
ATTRIBUTE other than [NONE] is out of the scope of
the Automatic Paper Selection (APS).
For details of APS, refer to the Basic Guide.
• When an attribute other than [NONE] is set for a
drawer, the paper placed in this drawer is out of the
scope of the Automatic Change of Paper Source
function.
For details of this function, see the following page:
 P.141 "COPY"

ADDRESS

This menu allows you to perform the following operations:
 P.147 "Managing contacts in address book"
 P.151 "Managing groups in address book"
Memo
For instructions on how to display the ADDRESS BOOK menu,
see the following page:
 P.139 "Accessing the User Menu"
- 146 -