Offramp Gateway - Toshiba E-STUDIO477S Advanced Manual

Offramp Gateway

The offramp gateway function allows for E-mail or Internet Fax sent from another device to be converted into standard fax data via
this equipment, which will be sent to the recipient specified by the sender via a public telephone line. This is useful in reducing
communication costs by using a combination of both the Internet and public telephone lines. For example, when sending documents
long distances, such as overseas, the Internet can be used to send the document to a machine in the country/region of destination
and then it will be forwarded to a target fax machine as fax data via a public telephone line.
1. The domain name of this equipment
and the fax number of the final
recipient are specified and an Internet
Fax is sent.
Internet Fax
machine
Client Computer
1. The domain name of this equipment
and the fax number of the final
recipient are specified and an E-mail
is sent.
Specifying an E-mail address
When you want to use this equipment as a relay station to perform an offramp gateway transmission, ask the sender to specify an E-
mail address as follows.
• FAX=xxxxxxxx@FQDN
The fax number of the final recipient is specified in "xxxxxxxx".
e.g.: In case that the fax number is "1234567890" and the domain name of this equipment (FQDN) is "host1.example.com", the
fax should be sent to FAX=1234567890@host1.example.com
Sending to a subaddress
• FAX=xxxxxxxx/T33S=yyyy@FQDN
The fax number of the final recipient is specified in "xxxxxxxx" and the subaddress in "yyyy".
e.g.: In case that the fax number is "1234567890", the subaddress is "1234", and the domain name of this equipment (FQDN) is
"host1.example.com", the fax should be sent to FAX=1234567890/T33S=1234@host1.example.com
Setting up the SMTP server
SMTP is a server protocol for sending and receiving E-mails. To use the offramp gateway function, you need to set up the SMTP
server so that this equipment can receive E-mails and Internet Fax using SMTP. For details of the operation, refer to the TopAccess
Guide.
2. The E-mail and the Internet
Fax in which the domain name
of this equipment is specified
are received, and are sent to
Mail Server
this equipment.
Internet
Intranet
Mail Server
4. If a subaddress is specified in the recipient of the
received fax, the fax is sent to the subaddress
destination.
- 47 -
3. The received E-mail and the Internet
Fax are converted to the standard
fax, and are sent to the final
recipient's fax machine.
This equipment
Mail Server
(SMTP)
Subaddress
G3 Fax machine
Destination
ADVANCED FUNCTIONS
1
2
3
4
5
6
7