Adf -> Sadf - Toshiba E-STUDIO477S Advanced Manual

EDITING FUNCTIONS
4
Press [OK].
1
2
Book - tablet is now set.
5
Select other copy modes as required, and
then press the [START] button on the
control panel.
3
ADF -> SADF
You can switch the feeding mode when the RADF (Reversing
Automatic Document Feeder) is used, from "ADF" to "SADF".
The paper feeding mode has 2 types as follows:
ADF (Continuous feed mode): Feeds originals continuously
when you press the [START] button on the control panel
4
while originals are being placed on the RADF. This is useful
when you make more than one copy in one operation.
(Default setting)
SADF (Single feed mode): Feeds originals one by one
automatically. This is useful when you usually only have 1
original.
Note
5
• When the single feed mode (SADF) is set, place originals
one sheet at a time. If you place more than one original, the
copied image may be skewed or the originals may misfeed.
1
Place paper in the drawer(s).
2
Press [ADF -> SADF] on the EDIT menu.
6
7
3
Press [OK].
The feeding mode is now set at "single feed mode".
4
Select other copy modes as required.
5
Place the original(s) on the RADF one sheet
at a time.
The original is pulled into the RADF automatically, and
then the menu below appears.
Repeat step 5 if you have another original. The placed
original will be pulled into the RADF automatically even if
you do not press [NEXT COPY] on the touch panel.
6
When the scanning of all the originals is
finished, press [JOB FINISH].
Memo
• If you want to stop copying, press [JOB CANCEL].
- 22 -