Setting Up The [Device Settings] Tab - Toshiba E-STUDIO477S Advanced Manual

SETTING N/W-Fax DRIVER
3) SNMP V3
If SNMP V3 is enabled, select one of the following items to
set how users are authenticated.
User ID File — Select this option when you want to use a
1
user ID file. Click [Browse] and specify the user ID file.
User Name/Password — Select this option when you want
to use the user name and password. When this option is
selected, keyboard or select the following items:
- User Name
- Authentication Protocol
- Authentication Password
- Privacy Protocol
2
- Privacy Password
Note
• If you select to enable SNMP V3, consult your network
administrator for preliminary advice on how to
authenticate users.
• Up to 31 characters including the following symbols can
be entered for each of the User Name, Authentication
3
Password and Privacy Password.
! $ % & ' ( ) - , < > @ [ ] ^ _ ` { } ~
4) [Restore Default]
Click this button when you want to reset all the settings
back to the defaults.

Setting up the [Device Settings] tab

4
On the [Device Settings] tab, you can change a setting for N/
W-Fax driver update or display the software version of the
driver.
Note
• Ask the administrator for details on the settings configured
for your MFP.
5
1
2
4
5
6
6
7
7
1) Update Automatically
Select whether or not the setting information of each item
on the [Device Settings] tab of the N/W-Fax driver is to be
obtained by automatically communicating with your MFP
every time this tab is opened.
- On — Select this to obtain the setting information
automatically.
- Off — Select this not to obtain the setting information
automatically. Set each item manually.
2) User Authentication
Select the authentication method which is to be used. Set it
to correspond to that of your MFP.
- Off — Select this not to perform user authentication.
- MFP Local Authentication — Select this to perform
MFP Local Authentication.
- Windows Domain Authentication — Select this to
perform Windows Domain Authentication.
- LDAP Authentication — Select this to perform LDAP
Authentication.
3) [Details]
When you click this button, the [LDAP Server Settings]
dialog box will appear. This option can be selected only
when [LDAP Authentication] is selected in the [User
Authentication] box.
P.81 "Setting up LDAP servers"
4) Enter the user credentials manually
When this check box is selected, you are prompted to enter
your user name and password every time you send a fax.
This option is available when any of MFP Local
Authentication, Windows Domain Authentication, or LDAP
Authentication is selected in the [User Authentication] box.
Memo
• To configure this option, select [Off] in the [Update
Automatically] box.
• This option can be used together with any of the user
authentication functions (MFP Local Authentication,
Windows Domain Authentication, LDAP Authentication).
5) Fax Function
Select whether or not the fax function is enabled. Set it to
correspond to that of your MFP.
- Enabled — Select this to enable the fax function.
- Disabled — Select this to disable the fax function.
6) Internet Fax Function
Select whether or not the Internet Fax function is enabled.
Set it to correspond to that of your MFP.
3 - Enabled — Select this to enable the Internet Fax
function.
- Disabled — Select this to disable the Internet Fax
function.
7) [Version Information]
Click this to display the software version information of the
N/W-Fax driver.
- 80 -