Mirror Image / Negative/Positive Reversal - Toshiba E-STUDIO477S Advanced Manual

EDITING FUNCTIONS
6
Key in the read values.
1) Press [X1], [X2], [Y1] and [Y2], and then key in the
read values correspondingly.
2) You can specify up to 4 areas on 1 page. When
1
you want to specify more than one area, press
[AREA 1] to [AREA 4] to switch the area, and then
key in the values correspondingly.
3) Press [OK] after you have specified all the areas.
2
3
7
Place the original again on the original
glass with its face down.
Place it with its bottom right to you. Align its top side
against the left side of the original glass.
4
5
8
Select other copy modes as required, and
then press the [START] button on the
control panel.
6
7

Mirror image / Negative/positive reversal

You can reverse an image like a mirror (mirror image), or you
can reverse light-and-dark of an image (negative/positive
reversal).
Negative/Positive reversal
1
Place paper in the drawer(s).
When using bypass copying, be sure to set the paper
size.
2
Place the original(s).
3
Press [EDITING] on the EDIT menu.
4
Select [MIRROR] or [NEG/POS], and then
press [OK].
- 12 -
Mirror image