Changing Data; Changing Private Group Data; Changing Template Data - Toshiba E-STUDIO477S Advanced Manual

TEMPLATES
9
Select other copy modes as required, and
then press the [START] button on the
control panel.
1

Changing Data

You can change the data of templates or private groups that
are already registered, such as the template name, user name,
password and setting of the automatic start function.
Note
2
• The data of the public template group can be changed from
the TopAccess menu but this cannot be done from the
control panel. For how to change them from the TopAccess
menu, refer to the TopAccess Guide.

Changing private group data

3
1
In the template menu, select the desired
group.
1) Press the [REGISTRATION] tab.
2) Select the desired group by pressing its button or
keying in its group number (3 digits).
3) Press [EDIT].
4
5
To switch the menu
Press or .
2
Key in the password for the selected group.
(If no password is set, go to step 3.)
6
1) Press [PASSWORD] and then enter the password
with the buttons on the touch panel or the digital
keys on the control panel.
2) Press [OK].
7
3
Change the data following step 3 on
"Creating a new private group" ( P.121).
4
Press the [FUNCTION CLEAR] button on
the control panel.
The menu returns to the BASIC menu.

Changing template data

1
In the template menu, select the group to
which the desired template is registered.
1) Press the [REGISTRATION] tab.
2) Select the desired group by pressing its button or
keying in its group number (3 digits).
3) Press [OPEN].
To switch the menu
Press or
2
Enter the password as follows and then
press [OK].
When the public template group is selected: Press
[PASSWORD] and then enter the Admin Password (6
to 64 characters) with the buttons on the touch panel
or the digital keys on the control panel.
When a private group is selected: Press [PASSWORD]
and then enter the password (up to 20 characters)
with the buttons on the touch panel or the digital keys
on the control panel. If no password is set, go to step
3.
- 124 -
.