Magazine Sort Mode - Toshiba E-STUDIO477S Advanced Manual

EDITING FUNCTIONS
5
Select other copy modes as required, and
then press the [START] button on the
control panel.
1
When the originals are placed on the RADF, scanning
and copying start. When they are placed on the original
glass, follow steps 6 and 7.
6
Place the next original, and then press
[NEXT COPY] on the touch panel or the
[START] button on the control panel.
Scanning of the next original starts. If you have more than
one original, repeat this step until the scanning of all the
2
originals is finished.
7
When the scanning of all the originals is
finished, press [JOB FINISH] on the touch
panel.
Copying starts.

Magazine Sort Mode

3
You can copy more than one original in the book-type page
order. This mode is called the magazine sort mode.
Magazine sort mode
4
1
2
3
The magazine sort mode can also be selected on the BASIC
menu. For details, see the following page:
 Basic Guide
5
1
Place paper in the drawer(s).
2
Select the paper size.
3
Place the original(s).
Memo
• When placing portrait originals in a landscape direction
6
as shown on the follow in the magazine sort mode set
the image direction function to ON on the EDIT menu.
Otherwise the originals will not be copied in the proper
page order.
P.21 "Image Direction"
7
6
4
2
12
4
Press [MAGAZINE SORT] on the EDIT
menu.
5
Set the binding margin width as required.
1) Press either [
(1.18") to adjust the binding margin width.
2) Press [OK].
7
9
11
6
Select other copy modes as required, and
then press the [START] button on the
control panel.
- 10 -
2 mm] (0.08") or [ 30 mm]