4.EDITING FUNCTIONS
6
Key in the read values.
1) Press [X1], [X2], [Y1] and [Y2], and then key in the read values correspondingly.
2) You can specify up to 4 areas on 1 page. When you want to specify more than one area, press
[AREA 1] to [AREA 4] to switch the area, and then key in the values correspondingly.
3) Press [OK] after you have specified all the areas.
7
Place the original again on the original glass with its
face down.
Place it with its bottom toward you. Align its top left corner
against that of the original glass.
8
Select other copy modes as required, and then press the [START] button on the control
panel.
Mirror image / Negative/Positive reversal
You can reverse a page like a mirror (mirror image), or you can reverse the black-and-white of a page
(negative/positive reversal).
1
Place paper in the drawer(s).
When using bypass copying, be sure to set the paper size.
2
Place the original(s).
3
Press [EDITING] on the EDIT menu.
Mirror image
Negative/Positive reversal
4 EDITING FUNCTIONS
Image Editing
101