After Measurement - Ecom EN2 Operating Instructions Manual

8.8. After Measurement

Let the probe cool down before
stowing them!
Check the condition of the particle filter! He should be
replaced when the contamination of the filter is equiv-
alent to a soot number of approx. 2 - 3.
Empty the water trap before transport
of the instrument (Only instruments without an
automatic condensate removal)!
Emptying the water trap:
1. Pull the drain hose
2. Drain the condensate
3. Attach the drain hose again
1. 2. 3.
Page 24 ecom-EN2