Power Supply; Data Memory - Ecom EN2 Operating Instructions Manual

4. Power Supply

Used accumulators can either be returned
to us or brought to recycling stations of
public waste disposal companies
respectively to stores selling accumulators!
The ecom-EN2 comes with an external charger. The analyser can
also be powered via the internal accumulator for a while (6 V; 3.8
Ah). The accumulator recharge should be started when the instru-
ment requires to (acoustical warning and display indication). The
accumulator charging stand can be checked looking at the voltage
indication on the display (menu "Control" - Info key). The battery
warning is activated when the value „Accu" is smaller than 5.7 V.
By 5.4 V the power operation via battery is no more possible; the
instrument must be further powered via the external charger.

5. Data Memory

The multi-media card enables the storage of punctual measure-
ments; the gathered values are written in a text file (J2KDV.txt). Data
format information is to be found in the appendix. The files can be
transferred to a PC via a card reader.
The following conditions must be fulfilled for using a multi-media
card:
- min. card volume 32 MB - max.32 GB (UHC)
- card formatted on 16 bit FAT or FAT32
- SD cards from SanDisk recommended
- PC with card reader
Page 10 ecom-EN2