Important Hints
Observe the following minimum times in order to
get correct measurement values:
- 1 min. for sensors calibration at fresh air
- 2 min. for stable measurement values
The following substances impair the instru-
ment´s operation:
1. Charge the internal battery regularly.
(an unused analyser should be charged at least 1 x per month)!
2. Never store the unit with a discharged battery!
ecom-EN2
The ecom-EN2 meets the requirements
of the DIN EN 50379 Part 2.
The ecom-EN2 should not be used for
continuous emission control!
- Solvent-containing vapours as:
- cleaning agents
- degreasers
- wax polishes
- adhesives
- Formaldehyde
Adjustments at burners and boilers
should be made only by specialists
who are familiar with these installations.
do contain
Page 3
Need help?
Do you have a question about the EN2 and is the answer not in the manual?