Maintenance Tips - Ecom EN2 Operating Instructions Manual

14. Maintenance Tips

Do not use other sensors or feelers from other manu-
facturers otherwise the TÜV / DIN EN approval will not
be valid anymore!
To secure the accuracy of your measuring instrument we recom-
mend the annual check by an authorized ecom partner. In the case
of strong demand (e.g. permanent several hours of measurement
per day, rough conditions etc.) shorter intervals between checks
should be selected - please contact your ecom partner. All ecom
partners are listed under www.ecom.de.
Service made by service centers non-authorized by
ecom GmbH will result in a complete and immediate
loss of any warranty!
The following advices will be of help for the daily check and mainte-
nance of single parts or assemblies:
Fine dust filter
Screw off the cover of the condensate trap/gas cooler and check the
state of the particle filter. Change it once the filter has a grey color (=
number 2 - 3 of the soot comparison scale).
Fine dust filter
Page 50 ecom-EN2