Ecom EN2 Operating Instructions Manual page 12

Once the instrument is switched on (key
<I/0>), the main menu is displayed.
6 sub-menus with the following func-
tions (non-visible sub-menus can be
called up while scrolling with the cursor
keys) are displayed:
- Gas analysis
- Soot...Oil trace
- Data processing
- Adjustments
- Control
- Diagnostics
To perform measurements, select with
the cursor keys the sub-menu "Gas
analysis" and confirm with <Enter>.
The instrument starts a 1- minute cali-
bration phase and it enquires if you wish
to use the data bank. If you want to
assign the sampled data to a specific
plant, so press <F1> (<F4> = no:
measurement will be performed without
assignment).
Fuel types acc. to 1
Fuel oil (B)
Natural gas (B)
City gas (B)
Coke oven gas (B)
Liquid gas (B)
Use the cursor keys to select the de-
sired fuel type and confirm with <En-
ter>.
Page 12
: Perform gas analysis
: Input of soot measurement results
: Assign measurements / Data transfer
(only by inserted MM card)
: Modify instrument adjustments
: Check operation state of instrument
: Read-out of firing automate
(only in connection with ecom-AK) /
delta-T measurement / Heating check /
4 Pa test
st
BImSchV
Gas analysis
Soot..Oil trace
Data processing
Adjustments
Control
Diagnostics
Do you wish to
use the data
processing?
Auswählen: <↵ ↵ ↵ ↵ > !
JA
NEIN
Fuel type
Fuel oil (B)
CO2max A1 B
15.4 0.50 0.007
↵ ↵ ↵ ↵
↑↓ ↑↓
↑↓ ↑↓
Select:
ecom-EN2