Software Installation; Installing Dataview - AEMC Simple Logger II User Manual

5.1

Installing DataView

DO NOT CONNECT THE INSTRUMENT TO THE PC BEFORE INSTALLING
THE SOFTWARE AND DRIVERS.
USB Flash Drive Install
1. Insert the DataView thumb drive into an available USB port on your
computer. If Autorun is enabled, an AutoPlay window appears on your
screen. Click "Open folder to view files" to display the DataView folder.
NOTE: If Autorun is not enabled or allowed, use Windows Explorer to
locate and open the USB drive labeled "DataView."
2. When the DataView folder is open, find the file Setup.exe and double-
click it to run the installation program. The DataView setup screen
appears.
3. In the upper left corner of the screen, choose the language version of
DataView to install. In the lower left corner are the available installa-
tion options.
In addition to the DataView software, you can select Adobe
•
Reader. This links to the Adobe web site here you can download
the latest version of Reader. This program is required to view
DataView PDF documents.
• The option DataView Update opens the AEMC website where
you can check for the latest DataView software version releases.
Similarly, Firmware Upgrades links to the website where you
•
can check for new firmware updates for the logger.
Finally, User Manuals installs the printable documentation that
•
accompanies DataView. (DataView also comes with a Help
system that is installed with the program files.)
Make your selections and click Install.
Simple Logger II Series
®

SOFTWARE INSTALLATION

CHAPTER 5
®
39