AEMC Simple Logger II Quick Start User Manual

Hide thumbs Also See for Simple Logger II:

Advertisement

Quick Links

QUICK START
USER GUIDE
Simple
Logger
II
®

Advertisement

Table of Contents
loading

Summary of Contents for AEMC Simple Logger II

  • Page 1 Simple QUICK START  USER GUIDE Logger ®...
  • Page 3: Statement Of Compliance

    The recommended calibration interval for this instrument is 12 months and begins on the date of receipt by the customer. For recalibration, please use our calibration services. Refer to our repair and calibration section at www.aemc.com. Serial #: ________________________________ Catalog #: _______________________________ Model #: ________________________________...
  • Page 4 Thank you for purchasing an AEMC Simple Logger ® ® For best results from your instrument and for your safety, read the enclosed operating instructions carefully and comply with the precautions for use. These products must be only used by qualified and trained users.
  • Page 5: Precautions Before Use

    Precautions Before Use These instruments comply with safety standard EN 61010-1 (Ed 2-2001) or EN 61010- 2-032 (2002) for voltages and categories of installation, at an altitude below 2000m and indoors, with a degree of pollution at most equal to 2 . •...
  • Page 6: Initial Setup

    Initial Setup The Simple Logger II (SLII) must be connected to DataView before it can be configured. ® ® To connect the SLII to your computer do the following: Install the DataView software, making sure to select the Data Logger Control ®...
  • Page 7: Configuring The Instrument

    Configuring the Instrument Before starting a recording on the instrument, various recording options should be config- ured. To do this, select Configure from the Instrument menu. The Configure Instrument screen appears. This consists of multiple tabs that contain groups of related options. Detailed information for each of these options is available by pressing the Help button.
  • Page 8 03/16 99-MAN 100401 v3 Chauvin Arnoux , Inc. d.b.a. AEMC Instruments ® ® 15 Faraday Drive • Dover, NH 03820 USA • Phone: (603) 749-6434 • Fax: (603) 742-2346 www.aemc.com...

Table of Contents