Connect To A Preconfigured Wi-Fi Network; Connect To A Vpn - Cisco 8811 User Manual

ConnecttotheNetwork
Procedure
Step 1
If the phone is plugged into the Ethernet, unplug the Ethernet cable.
Step 2
Press Applications
Step 3
Navigate to Admin settings > Network setup > Wi-Fi client setup > Wi-Fi sign in access.
Step 4
Navigate to Wireless and press On.
Step 5
Navigate to Wi-Fi sign in access and press On.
Step 6
Press Apply to save the changes, or press Revert to cancel the changes.

Connect to a Preconfigured Wi-Fi Network

You can connect to a Wi-Fi network with your Cisco IP Phone 8861 and 8865. But the Cisco IP Phone 8865NR
does not support Wi-Fi.
Depending upon how your phone is configured, you could be required to sign in when you join a Wi-Fi
network or when your phone powers up.
You cannot dismiss the Wi-Fi sign-in window without entering the correct username and password.
Procedure
Step 1
Enter your Wi-Fi credentials when prompted.
Step 2
Select Sign-in.

Connect to a VPN

You connect to your VPN in one of two ways:
• By entering credentials (username and password, or just a password)
• With a certificate
If you have a certificate installed on your phone, you do not need to do anything. Your phone automatically
connects to the VPN.
Procedure
Step 1
When prompted, enter your VPN credentials.
Step 2
Select Sign-in.
Cisco IP Phone 8800 Series User Guide
.
Your Phone