Phone Configuration; Add The Phone To The Wi-Fi Network - Cisco 8821 User Manual

Phone Configuration

Procedure
Step 1
Connect the long connecter of the USB cable to the bottom of the phone with the pins aligned.
Step 2
Plug the other end into the USB port in the computer.
Phone Configuration
Phone configuration uses one of these methods:
• Your administrator sets up the phone. When this happens, you don't need to do any configuration. Your
• You set up the phone for your Wi-Fi network and to connect to the call control system. When this

Add the Phone to the Wi-Fi Network

Before You Begin
You need the following information about the Wi-Fi network:
• SSID
• Security type (for example, WEM, WPA)
Cisco Wireless IP Phone 8821 and 8821EX User Guide
20
administrator may lock your access to the configuration menus.
happens, your administrator gives you the information you need to enter in the phone.
Phone Setup