Detailed View - Opticon NLV-3101-HD Specification Manual

4. Detailed View

2
1
4
No Name
1 Trigger Key
2 Scanning Window
3 Status LED
4 Beeper Hole
5 Mounting Holes
3
Figure 1: Detailed View of NLV-3101
By pressing this key, the scanner starts taking an image from the scanning
window and LED illumination is emitted to read 1D/2D codes.
Light paths of the imager, LED illumination and LED aiming. Ensure that
the lens is not exposed to dust and dirt before scanning.
The operating statuses are indicated by different colors.
A sound from a built-in beeper comes out through this hole. When they are
covered, the beeper sound may not be able to be heard. The sound varies
depending on the status. Beeper settings can be configured in various
ways: enable or disable beeper as well as change the loudness and
duration.
Screw holes for installing the scanner. Two more holes are located on the
bottom side, the opposite side of where the trigger key is located.
5
Description
6
NLV- 3101- HD
Specifications Manual