Furuno FAR-3320W Installation Manual page 24

1. INSTALLATION
How to hoist the antenna unit
The antenna unit may be assembled before hoisting it to the mounting platform. Hoist
the antenna referring to the illustration below and "FAR-3xx0 Series S-band Antenna
Unit Installation Notice," issued separately.
How to Hoist the S-band Antenna Unit
Method 1
OK
Set belt slings to
antenna support.
Method 2
Fasten belt sling to a shackle, pass belt sling around antenna support and fasten
other end of belt sling to other shackle.
Shackle Shackle
(left, right) (left, right)
1-10
Belt sling
Antenna
This is NG because
Support
belt slings are not on
the radiator brackets.
Belt sling Belt sling
Lifting fixture (ø20) Lifting fixture (ø20)
NG
Bow side up
Antenna support Antenna support
Pass belt sling around
antenna support.