Furuno FAR-3320W Installation Manual page 109

3.6.3 [INSTALLATION] menu
Open the main menu then select [9 RADAR INSTALLATION] [3 INSTALLATION] to
open the [INSTALLATION] menu.
IMO-/A-type radars
[1 RANGE UNIT]
For the B-type radar, select the range unit, NM, SM, KM or kyd then push the left but-
ton.
[2 MODEL]
Confirm the model of your radar. If this setting is different from your model, the radar
will not function properly. The number before a diagonal (12, 25, 30) is the output pow-
er (in kW). [UP], [DOWN] indicates the location of the transceiver unit. [UP] is in the
antenna unit, and [DOWN] means separate transceiver unit.
[S-SSD] means S-band solid state device.
[3 TYPE]
Select the type of radar: [IMO], [A] or [B].
[IMO]: IMO specifications
[A]: Near-IMO specifications
[B]: Non-Japanese fishing vessel specifications
[4 ON TIME], [5 TX TIME]
These items show the number of hours the radar has been turned on and transmitted,
respectively. Value can be changed; for example, after replacing the magnetron. [TX
TIME] can be reset to 0.
2
3
4
5
6
AUTO/MANUAL
7
8
3. SETTINGS AND ADJUSTMENTS
B-type radar
0
AUTO/MANUAL 0
3-9