Rpf - Floor Type, Rpfi - Floor Concealed Type; Accessories Supplied With The Unit; Unit Installation - Hitachi RCI-1.0FSN4 Service Manual

2 Unit installation

RPF - Floor type, RPFI - Floor concealed type

2.9 RPF - Floor type, RPFI - Floor concealed type

2.9.1 Accessories supplied with the unit

Check that the following accessories are supplied with the unit.
?
N O T E
Please contact your HITACHI distributor if any of the accessories has not been supplied with the unit.
Accessory
Installation adjustment screw
Philips head screw
2.9.2 Unit installation

Initial checks
Check that there is enough space around the unit. Consult the corresponding chapter of the Technical Catalogue for
information on the unit measurements.
RPF - Floor type (1.0-2.5)FSN2E
RPFI - Floor concealed type (1.0-2.5)FSN2E
1. Vertical air outlet.
Before starting installation, plan the direction of the pipes and wiring required. Also bear in mind that there must be
enough space around the unit for installation and maintenance.
Check that the floor surface where the unit is to be installed is completely horizontal.
?
N O T E
Bear in mind the air distribution from the unit to the room and select a suitable place for an even air temperature in the room.
64 SMGB0099 rev.0 - 12/2016
Appearance Quantity Purpose
4 To adjust the flat level of the unit.
2 For PC-ARFPE
1. Horizontal air outlet.