Hitachi RCI-1.0FSN4 Service Manual page 333

9 Servicing
RPK-FSN(H)3M - Wall mounted

For RPK-(2.0-4.0)FSN(H)3M
1 Remove the front panel according to the
2 Remove the electrical box according to the
3 Remove the louver cover (A) (2 portions) attached to the lower part of the cabinet with a slotted screwdriver.
4 Remove 2 hooks (B) for the drain pan.
?
N O T E
Before removing the drain pan, check that the drain hose is not fixed. If the drain hose is firmly fixed, the drain pan cannot be removed.
5 Remove 3 catches at (C) and (D) in the following procedure. Apply a force in the direction of the arrow (1) and
release 1 catch (C) fixing the drain pan to the cabinet. Then apply a force in the direction of the arrow (2) and release
2 catches (D). Remove the drain pan.
6 When mounting the drain pan, mount it in the reverse procedure.
(A)
(C)
Cabinet
1 ( )
319 SMGB0099 rev.0 - 12/2016
"9.9.2 Removal of the front panel"
"9.9.7 Removing Electrical Box"
(C)
Louver cover (A)
Catches for drain pan
chapter.
chapter.
(A)
(B)
(B)
Hook for drain pan
(D)
Catches for drain pan
?
N O T E
The catches are hidden from view by the fan motor.
The figure above shows an example with the fan motor
removed.
(D)
Drain pan
2 ( )
9