Removal Of The Fan Motor - Hitachi RCI-1.0FSN4 Service Manual

9 Servicing
RPC-(3.0-6.0)FSN3E - Ceiling type

9.4.4 Removal of the fan motor

1 Open the air inlet grille as indicated in chapter
Removal of the air filter".
2 Remove the air inlet clip.
3 Separate the indoor fan motor connector.
Nº
1 Electrical box
4 Remove the screws securing the box and attach to the
lower frame.
!
C A U T I O N
Hold onto the electrical box to prevent it from falling.
5 Press the four attachment points of the cover (1) inwards
and remove it.
6 Loosen the coupling screws using a wrench.
7 Remove the securing flange and remove the fan motor
by sliding it backwards.
!
C A U T I O N
Hold onto the motor to prevent it from falling.
277 SMGB0099 rev.0 - 12/2016
"9.4.1
Part
Air inlet Stay
panel
Wiring panel
Hook
Casing
To
loosen
Allen key
Coupling
Fixing band
Fixing screw
Fixing screw
9
Motor