Removal Of The Fan Runner And The Fan Motor - Hitachi RCI-1.0FSN4 Service Manual

9 Servicing
RCIM-(0.6-2.5)FSN4(E) - 4-way cassette (compact)

9.2.5 Removal of the fan runner and the fan motor

1 Remove the air inlet grille as indicated in
Air filter and the Air inlet grille".
2 Remove the bell-mouth. Remove the 4 fixing screws attaching
the bell-mouth to the drain pan and remove the bell-mouth.
3 Removing the fan guide. Remove the 8 fixing screws and
remove the drain pan.
4 Removing the Fan runner and the Fan Motor
a. Remove the nut and the washer fixing the fan runner.
b. Remove 3 nuts fixing the fan motor.
c. Then remove the fan motor.
?
N O T E
When reassembling these parts, tighten the nuts with a tightening
torque of 8N-m.
261 SMGB0099 rev.0 - 12/2016
"9.3.1 Removal of the
Fixing screw (x8)
Vibration
absorver
(3 pcs.)
Fan motor
Fixing nut
(3 pcs.)
Fixing screw (x4)
Wire cover
Fan runner
Fixing nut
Fan guide
Bell-mouth
9